Screw Machine Length Fractional
For use in screw machines, these short length drills provide maximum rigidity resulting in increased accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
118 Degree Drill Point
135 Degree Split Point is self centering and eliminates walking and reduces thrust.Polished-Bright - Aids in chip flow
Black Oxide - It is used to add mild corrosion resistance.Titanium Coated {TIN} - Enhances surface hardness to help penetrate tough materials, makes the bits highly corrosion resistant and significantly reduces friction between bit and workpiece. Increases wear resistance.
TICN - has good adhesion, toughness, and resistance to chipping and performs well on drills where moderate temperatures are generated at the cuffing edge. Tialn - reflects the heat back into the chip and away from the tool and workpiece. Greater ductility makes it a good choice for interrupted cuts. Increased production levels at higher feeds and speeds and longer tool life in high heat applications are the primary benefits.All items are new in original manufacturer's packaging {unless otherwise noted}.
They are limited to quantities available.These items are from manufacturer's overstocks, distributors who have changed products lines and manufacturer's who have had print changes and no longer have a particular job in house where items where used.
Visuals are actual item{s}
17/64 Left Hand Screw Machine Length Drill High Speed Steel Diameter Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
9/32" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
19/64" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
5/16" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
8.7MM Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
11/32" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
23/64" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
3/8" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
13/32" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
27/64" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
7/16" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
15/32" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
1/2" Left Hand Screw Machine Length Drill High Speed Steel Titex
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
5/32" Screw Machine Length Drill Bit High Speed Steel Bright 135 Degree Split Point Illinois Eclipse
17/64 Left Hand Screw Machine Length Drill High Speed Steel Diameter Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
9/32" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
19/64" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
5/16" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
8.7MM Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
11/32" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
23/64" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
3/8" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
13/32" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
27/64" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
7/16" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
15/32" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
1/2" Left Hand Screw Machine Length Drill High Speed Steel Titex (Left Hand Screw Machine Drill)
Used extensively in screw machine operations and in close center multiple spindle gear driven drilling heads where adjacent spindles operate alternately right and left hand.
Can use as screw extractor for drilling out broken studs or fasteners.
The shorter rigid drill minimizes deflection when heavy feed rates are used.
General Purpose drills suitable for most applications on a wide variety of materials
3/32" Screw Machine Length Drill Bit High Speed Steel Black Oxide (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Bright Screw Machine Length Drill Bit High Speed Steel USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Screw Machine Length Drill Bit High Speed Steel Bright Nachi (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Screw Machine Length Drill Bit High Speed Steel Bright (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" High SPeed Steel Screw Machine Length Drill Bit Bright USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Black Oxide Screw Machine Length Drill Bit High Speed Steel (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Screw Machine Length Drill Bit High Speed Steel Bright U.S.A. (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Screw Machine Length Drill Bit High Speed Steel Black Oxide USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Screw Machine Length Drill Bit High Speed Steel Black Oxide USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
Screw Machine Length Drill Bit 7/64" Diameter High Speed Steel Black Oxide lot of 4 pcs (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
7/64" Slow Spiral Screw Machine Length Drill Bit High Speed Steel Bright Cleveland Twist (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life.
1/8" Screw Machine Length Drill Bit High Speed Steel Bright USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
1/8" High Speed Steel Screw Machine Length Drill Bit Diameter Bright Nachi (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Screw Machine Length Drill Bit High Speed Steel Bright Lot of 4 Pcs (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Bright Screw Machine Length Drill Bit High Speed Steel (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Screw Machine Length Drill Bit High Speed Steel Bright Union Twist Drill (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" High Speed Steel Screw Machine Length Drill Bit Bright Illinois Eclipse (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Split Point Screw Machine Length Drill Bit High Speed Steel Bright 135 Split Point (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Screw Machine Length Drill Bit High Speed Steel Bright 135 Split Point USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Black Oxide Screw Machine Length Drill Bit High Speed Steel 135 Split Point USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Screw Machine Length Drill Bit High Speed Steel Black Oxide 135 Split Point Cleveland Twist Drill (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Screw Machine Length Drill Bit High Speed Steel Black Oxide 135 Split Point Morse (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Screw Machine Length Drill Bit High Speed Steel Black Oxide 135 Split Point Illinois Eclipse (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Black Oxide High Speed Steel 135 Degree Split Point Screw Machine Length Drill Bit USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
9/64" Screw Machine Length Drill Bit High Speed Steel Black Oxide 135 Split Point (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" Screw Machine Length Drill Bit High Speed Steel Bright USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" Bright Screw Machine Length Drill Bit High Speed Steel Illinois Tool (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" High Speed Steel Screw Machine Length Drill Bit Bright 135 Degree Split Point USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" Screw Machine Length Drill Bit High Speed Steel Bright 135 Degree Split Point Illinois Eclipse (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" Black Oxide Screw Machine Length Drill Bit High Speed Steel 135 Degree Split Point USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" Screw Machine Length Drill Bit High Speed Steel Black oxide 135 Degree Split Point Dormer (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" Screw Machine Length Drill Bit High Speed Steel Black oxide 135 Degree Split Point Illinois Tool (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
5/32" Screw Machine Length Drill Bit High Speed Steel Black oxide 135 Degree Split Point Morse (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
4 MM Screw Machine Length Drill Bit High Speed Steel Bright 135 Degree Split Point Kennametal (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
11/64" Screw Machine Length Drill Bit High Speed Steel Bright 118 Degree Point USA (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
11/64" Bright Screw Machine Length Drill Bit High Speed Steel 118 Degree Point Nachi (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.
11/64" Screw Machine Length Drill Bit High Speed Steel Bright 118 Degree Point Illinois Tool (Drill Bit Screw Machine Length High Speed Steel Fractional )
Applications = Developed primarily for use in screw machines, these short length drills provide maximum rigidity resulting in increased hole accuracy and extended tool life. Recommended for drilling a wide variety of materials including non-ferrous materials and low tensile strength steels.